Testing Dry Chili Pods for Scoville Heat Units (SHU)
Dried chili peppers are widely used in food production, spice blends, sauces, and consumer products, but how do you accurately measure their heat level? The answer lies in determining their Scoville Heat Units (SHU), the standard measure used to quantify pungency based on capsaicin content.
In this demonstration, we show how dried chili pods can be prepared, extracted, and analysed using the FoodSense capsaicin testing system to determine their SHU value quickly and reliably.
Why Sample Preparation Matters
The first step in testing dried chili pods is preparing a representative sample. The stalks are removed because they contain virtually no capsaicin and would only dilute the measurement.
The dried pods are then blended into fine flakes. The finer the material, the more efficient and reproducible the extraction process becomes. While a powder is ideal, well-processed flakes can also provide excellent results.
A consistent particle size helps ensure that capsaicin is extracted uniformly from the sample, improving both accuracy and repeatability.
Extracting Capsaicin from Dried Chilies
To prepare the sample for testing:
Weigh 0.1 g of chili flakes.
Add the flakes to 0.9 mL of extraction buffer.
Vortex thoroughly to maximise capsaicin extraction.
This creates an initial 1:10 dilution of the chili sample.
However, dried chilies can contain very high concentrations of capsaicin, particularly in hotter varieties. As a result, additional dilution steps are often required before testing.
Finding the Correct Dilution
The FoodSense app immediately indicated that the first dilution was too concentrated for measurement.
To reduce the concentration:
1:10 dilution → Too concentrated
1:100 dilution → Too concentrated
1:1,000 dilution → Suitable for testing
The 1:1,000 dilution was prepared by taking 100 µL of the previous dilution and adding it to 900 µL of fresh buffer at each step.
This demonstrates an important point when working with dried chili products: high heat levels often require significant dilution before quantitative measurement can be made.
Measuring Scoville Heat Units
Once the appropriate dilution was prepared, the sample was applied to the FoodSense test strip and analysed using the FoodSense app.
The measurement completed successfully and returned a result of:
43,800 Scoville Heat Units (SHU)
This value is consistent with the heat levels expected from moderately hot dried chili varieties.
Representative Sampling is Important
While this demonstration used a small amount of material, commercial testing should normally involve blending multiple chili pods together before analysis.
Individual pods can vary significantly in capsaicin content due to:
Growing conditions
Maturity at harvest
Drying methods
Genetics of the plant
By combining several pods into a single homogenised sample, the final SHU measurement is more representative of the overall batch.
Key Takeaways
When testing dried chili pods for SHU:
Remove stalks before analysis.
Blend pods into fine flakes or powder.
Thoroughly extract capsaicin using the supplied buffer.
Be prepared to perform multiple dilution steps.
Use representative samples containing multiple pods where possible.
Confirm final SHU values using an appropriate dilution within the measurement range.
In this example, a dried chili sample required dilution to 1:1,000 before measurement and produced a final result of 43,800 SHU.
The FoodSense capsaicin testing platform makes it possible to quantify the heat level of dried chili products rapidly, helping producers, processors, and quality control laboratories verify product consistency and accurately characterise chili heat.
Comments